|
|
|
|
|
|
|
|
21LED 220VAuto PIR LED Light
|
|
21LED 220VAuto PIR LED Light
C41
--------------------------------------------------------------------------------
PIR Sensitive Lamp Instruction Specification
Product description
1. Product size:diameter 80mm.highness 91mm.rotundity(hexagon).net wieght 110g.
2. power supply mode: input voltage 265VAC 85-47-60Hz, input power 2.2-3.8W.
3 Features: high efficiency light, long life and low optical attenuation new white LED technology. Has efficiency, save electricity, long life, no radiation, environmental protection, energy saving, explosion-proof, etc
4. Sensing technology: the adoption of advanced pyroelectric sensor technology and light sensor technology. With high sensitivity, strong anti-interference, low consumption, etc.
5 Convenient installation: using E27 E26, B22 interface, and directly into the holder.
Product characteristics
1.ABS shell using environmental protection product PC material +. With environmental protection, toughness, brightness is good, etc
2. white LED light source adopts high brightness, in the life of 8 million hours.
3. 85 -265VAC the voltage range continuous work, 110VAC 60Hz 2.5 W, 220VAC power input power input frequency 50Hz, standby power than 360 w. w. 0.23.
4. After the products are in the automatic induction working mode. With automatic induction, electric and control function. When someone in the detection range, environment, less than 10LUX illuminance automatically open. When the man left, will continue already set time after lighting, shut down automatically lighting. When the environment is more than 10LUX illuminance, on the contrary, standby.
5. Induction Angle is less than 120 degrees, induction distance than 4.5m. Lighting delay time about 40 seconds (optional), more than 15 meters space illumination.
Install and use
1. do not need to switch on metope, the installation of direct light bulb twist to the snail mouth (socket) on the lamp.
2. should try to close one head induction course of action
Described
1. When open source, the bright lights
A. When the environment, more than 10LUX illumination lamps in the work. Standby
B. Light bulb will be lighted, take one or two minutes to stability
Notes
1.Storage temperature: - 25 ¡æ~ 80 ¡æ using temperature: - 5 ¡æ~ 50 ¡æ. Humidity 5% - 93%.
2.Damp and vibration.
3.Environmental temperature is higher, sensitivity will decline, induction distance will be shortened.
4.Armor IP22 level in the room, please use, not in the rain. Do not install the product to the door or the temperature change drastically. Please pay attention to the temperature and humidity working environment, otherwise the battery life will be affected.
Application examples
These products are widely applied in corridor, corridor, garage, a built-in wardrobe or cupboard, porch, toilet, kitchen, the basement of the place such as automatic lighting.
|
|
|
|
|
|
|
|
